List of pictograms used
Read the instructions!
This light is only suitable for indoor
use in dry and enclosed spaces.
Volt (AC)
Hertz (mains frequency)
Watt (effective power)
Safety class II
LED Floor Lamp
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high
quality product. Please be sure to carefully
read all the instructions for use. Fold out the page with
illustrations. These instructions are part of the product
and contain important information on setup and han-
dling. Always observe all safety instructions. Before
using this product for the first time verify the correct
voltage and that all parts are properly installed. If
you have any questions or are unsure about operat-
ing the product, please contact your distributor or
service centre. Please keep these instructions in a safe
place and pass them on to third parties if necessary.
Intended use
This light is only suitable for indoor use
in dry and enclosed spaces. This product
is intended for private household use only.
Observe the warning and safety in-
structions!
Caution - Risk of electric shock!
Danger to life!
This light is not suitable for dimmer or
electronic switches.
For your safety
Warning - Hot surfaces!
Dispose of the packaging and device
in an environmentally-friendly man-
ner!
Scope of delivery
Check that all the parts are present and that the
appliance is in perfect condition immediately after
unpacking.
1 LED floor lamp, model 14115702L / 14115808L /
14115902L (two-part) 14117902L
1 Base
1 Power supply
2 Screws
1 Set of assembly instructions and usage instructions
Parts Description
Light body
1
Lead
2
Mains supply
3
Foot operated ON / OFF switch
4
Base
5
Screws
6
Lamp arm (14115902L)
7
Screws (14115902L)
8
Introduction
GB
17