Parts Description; Technical Data; Scope Of Delivery; General Safety Instructions - LIVARNO LUX LED MOOD LIGHT Mode D'emploi

This is a specialist product, as the colour value
amounts are beyond the ranges listed in the brackets.
Colour value amounts: (x<0.270 or x > 0.530);
(y<-2.172 x² or y >-2.3172 x² + 2.3653 x -0.1595).

Parts Description

LED mood light
1
Remote control
2
button
3
button
4
OFF button
5
ON button
6
W button
7
FLASH button
8
STROBE button
9
FADE button
10
SMOOTH button
11
Colour buttons
12
Battery compartment
13
Infrared diode
14
Battery drawer
15
Battery
16
Insulating strip
17
Glass ball
18
Lamp base
19
Mains plug
20

Technical Data

Colour changing LED mood light + power
supply
Total power input: 2.5 W
Colour changing LED mood light
Item number: 14118006L
Supply voltage: 230 V∼ 50 Hz
Light bulb: 18 x RGB LED
(not replaceable)
Protection class: II /
Remote Control
Voltage: 1 x 3 V
cell
Range: approx. 5 m
Introduction / General safety instructions
1 LED mood light
1 Infrared remote control
1 CR2025 button cell (inserted)
1 Set of instructions for use
Before using the product, please familiarise yourself
with all of the safety instructions and instructions for
use! When passing this product on to others, please
also include all the documents!
CR2025 button

Scope of delivery

General safety
instructions
LIFE AND RISK OF ACCIDENT
FOR INFANTS AND CHILDREN!
This product may be used by children age
8 years and up, as well as by persons with red-
uced physical, sensory or mental capacities, or
lacking experience and/or knowledge, so long
as they are supervised or instructed in the safe
use of the product and understand the associa-
ted risks. Do not allow children to play with the
product. Cleaning and user maintenance must
not be performed by children without supervision.
Exposure to certain strobe lights or lighting
effects can cause epileptic seizures or uncon-
sciousness in some people. If you experience
symptoms of an epileptic seizure, seek immediate
medical attention.
Do not look directly into the light source (light
bulb, LED etc.).
Do not use optical instruments to look at the
light.
Avoid the danger of death from
electric shock!
Verify the available mains voltage matches
the required operating voltage of the product
before use (see „Technical Data").
Do not use the product if you detect any kind
of damage.
DANGER TO
GB/IE/NI 7