Basic Operations - JVC KD-R521 Mode D'emploi

Basic operations

Loading slot
Remote sensor (for KD-R521/KD-R423/KD-R422/KD-R421)
You can control this unit with an optionally purchased
remote control, RM-RK52 (page 15, 16).
Detaches the panel
When you press or hold the following button(s)...
Button
• Turns on/off [Hold].
• Selects the sources (FM, CD, USB or USB-IPOD, F-AUX, BT AUDIO or R-AUX or
/ SOURCE
BT PHONE, AM). "CD" or "USB" is selectable only when a disc is loaded or a USB
device is connected.
Control dial • Adjusts the volume level.
(turn) • Selects items.
• Mutes the sound during playback. If the source is "CD" or "USB/USB-IPOD"
Control dial
playback pauses. Press the button again to cancel muting or resume playback.
(press)
• Confirms selection.
• Selects the sound mode.
EQ
• Enters tone level adjustment directly [Hold]. (page 12)
BRIGHTNESS Enters <BRIGHTNESS> menu directly. (page 13)
• Activates/deactivates TA Standby Reception.
• Enters PTY Searching mode [Hold].
T/P BACK • KD-R521: Selects the controlling terminal of an iPod/iPhone [Hold]. (page 11)
• Returns to the previous menu.
• Exit from the menu [Hold].
• Changes the display information.
DISP
• Scrolls the display information [Hold].
KD-R521/KD-R423/KD-R422/KD-R421 is equipped with the steering wheel remote control function.
• For details, refer also to the instructions supplied with the remote adapter.
Control dial
General operation
Display window
Ejects the disc
Front auxiliary
input jack
USB (Universal Serial
Bus) input terminal
ENGLISH 5