Table Des Matières; How To Attach/Detach The Control Panel; How To Reset Your Unit; How To Forcibly Eject A Disc - JVC KD-R521 Mode D'emploi

Masquer les pouces Voir aussi pour KD-R521:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

How to attach/detach the control
panel

How to reset your unit

Your preset adjustments will
also be erased.

How to forcibly eject a disc

[Hold]
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.

Maintenance

Cleaning the unit
Wipe off the dirt on the panel with a dry silicon
or soft cloth. Failure to observe this precaution
may result in damage to the unit.
Cleaning the connector
Wipe off dirt on the connector of the unit and
panel. Use a cotton swab or cloth.

About discs

This unit can only play the CDs with:
Discs that cannot be used:
• Discs that are not round.
• Discs with coloring on the recording surface
or discs that are dirty.
• You cannot play a Recordable/ReWritable
disc that has not been finalized. (For the
finalization process refer to your disc writing
software, and your disc recorder instruction
manual.)
• 8 cm CD cannot be used. Attempt to insert
using an adapter can cause malfunction.
CONTENTS
3
4
4
5
6
8
9
9
(For KD-R521/KD-R423/KD-R422/KD-R421:
Handling discs:
• Do not touch the recording surface of the
disc.
• Do not stick tape etc. on the disc, or use a disc
with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move
outward.
• Clean the disc with a dry silicon or soft cloth.
Do not use any solvents.
• When removing discs from this unit, pull them
out horizontally.
• Remove the rims from the center hole and
disc edge before inserting a disc.
ENGLISH
3

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Kd-r423Kd-r422Kd-r421Kd-r45

Table des Matières