Xxc0812 Side Mounting - Spinlock XX Clutch XX0812 Mode D'emploi

XX0812 Side Mounting
XX0812 Side Mounting
XX0812/HS

XXC0812 Side Mounting

XXC0812/HP and /HS are supplied Handed ready
Washers and Mounting Pad. See Diagram 1.
horizontal to the deck and avoid flexing the body.
the XXC body. Insert jaw set and close rear block.
Align Rope Entry and Exit Moulding for
smoooth running and minimal friction.
XXC0812/HBP & HBS are designed for bonding
directly onto decks, spars and booms.
materials and instructions for bonding. It is essential
you refer to your own engineering design data,
load data and materials supplier for guidance.
If Side Mounting 2 XXC0812/HBP and S in a
of XXC0812 Moulded Parts is possible.
34
www.spinlock.co.uk
spinlock_hi_load_A5_12_1.indd 34-35
XX0812/HP and XX0812/HS are supplied
fasteners (supplied). Insert jaw set and close rear
Align rope with entry and exit mouldings for
smooth running and minimum friction.
1
2
Custom options - contact: spt@spinlock.co.uk
ZS Alloy
ZS Carbon
ZS Open
XX0812
35
23/11/12 10:24:23