Fitting Procedure - Spinlock XX Clutch XX0812 Mode D'emploi

Converting XXC0812 to XXC0812/L & XX0812 to XX0812/L lock open version
The XXC0812 & XX0812 can be converted to the XXC0812 & XX0812/L with the
purchase of the XX-LCK.

Fitting procedure:

1. Check kit components before commencing (Diagram 1).
2.
rear moulding. Remove this screw.
3. Hold rear cover at top and rotate and pull out from the top.
4. Pull the complete rear moulding and jaw assembly free from the body.
5.
6.
7. Assemble lock open version as per diagram 1.
8. Insert jaw spring ends into latch lever support, so that the spring coils align with holes in
latch support.
9.
holes to align.
10.
11. Insert jaw assembly into body.
12. Angle rear moulding backward, to locate lower fixing hooks in body.
13. Rotate top of cover into place, flush with body.
14.
32
www.spinlock.co.uk
spinlock_hi_load_A5_12_1.indd 32-33
15.
and closing the handle fully.
16.
1
3
how to use
XXC0812
pages 14-15
2
4
installation spares
33
pages 20-21 pages 36-37
23/11/12 10:24:21