Hitecsa EWMIM 117 Mode D'emploi page 90

EWMIM model
Fan coil application
Cooling capacity MIN/NOM/MAX (1)
ESEER +
Nominal cooling capacity (1) (*) EN 14511:2013
EER EN 14511:2013 (1) (*)
ESEER EN 14511:2013
Heating capacity MIN/NOM/MAX (2)
Nominal heating capacity (2) (*) EN 14511:2013
COP EN 14511:2013 (2) (*)
Application radiant
Cooling capacity MIN/NOM/MAX (3)
Nominal cooling capacity (3) (*) EN 14511:2013
EER EN 14511:2013 (3)
Heating capacity MIN/NOM/MAX (4)
Nominal heating capacity (4) (*) EN 14511:2013
COP EN 14511:2013 (4) (*)
Sound pressure (5) (∆)
Sound power (6) (∆)
Scroll compressor
Fans
Heat exchanger water content
Water buffer tank content
Heat exchanger nominal flow water side (1)
Residual head (P0/ASP0 installation) (1)
Residual head (PI0/ASPI0 installation) (1)
Residual head (P1/ASP1 installation) (1)
Amount of R410A refrigerant
Amount of Oil PVE
Electrical data
Absorbed power in summer mode NOM (1) (●)
Absorbed power in winter mode NOM (2) (●)
Absorbed power in summer mode NOM (3) (●)
Absorbed power in winter mode NOM (4) (●)
Pump absorbed power (P0/PI0-ASP0/ASPI0)
Pump absorbed power (P1/ASP1)
Electrical power supply
Auxiliary power supply
Nominal current
Maximum current (■)
Pump absorbed current (P0/PI0-ASP0/ASPI0)
Pump absorbed current (P1/ASP1)
Dimensions
Width P0/PI0/P1
Width ASP0/ASPI0/ASP1
Height P0/PI0/P1
Height ASP0/ASPI0/ASP1
Depth P0/PI0/P1
Depth ASP0/ASPI0/ASP1
Water connections
(1) Under the following conditions: condenser
inlet air temperature 35°C; chilled water
temperature 7°C; temperature differential at
evaporator 5°C.
(2) In the following conditions: evaporator
inlet air temperature 7°C B.S., 6°C B.U.; hot
water temperature 45°C; temperature
differential at evaporator 5°C.
(3) Under the following conditions: condenser
inlet air temperature 35°C; chilled water
temperature 18°C; temperature differential at
evaporator 5°C.
(4) In the following conditions: evaporator
inlet air temperature 7°C B.S., 6°C B.U.; hot
water temperature 35°C; temperature
differential at evaporator 5°C.
ALLEGATI / ENCLOSED DOCUMENTS / ANNEXOS / ANLAGEN / ANEXOS
(5) Sound pressure level in dB(A) referring to
a 5 m distance from the unit, in directionality
factor equal to 2.
(6) Sound power level in dB(A) on the basis
of measurements taken in accordance with
UNI EN-ISO 9614 and Eurovent 8/1
Standards.
(■) Current drawn by the compressor and
fans.
(●) Power absorbed by the compressor and
fans.
(*) The data according to EN14511 refer
staging P0/PI0/ASP0/ASPI0. Refer to the
section "Attachments Technical Note" to the
data of the establishment P1/ASP1.
92
117
kW 8,3/16/17
5,87
kW 16,2
2,98
5,15
kW 6,8/18,0/19,1 10,1/24,6/27,2
kW 17,7
3,32
kW 11/20,1/21,2 14,5/27,5/29,3 15,7/31,7/32,6
kW 20,3
3,90
kW 7,5/19,1/20,1 9,7/25,3/27,9 10,2/29,4/31,6
kW 18,8
4,10
dB(A) 46
dB(A) 72
Scroll regulated by inverter
n° x kW 2x0,3
l 1,5
l 110
l/h 2800
kPa 89/87
kPa 89/87
kPa 148/146
See serial number plate
See compressor plate
kW 5,37
kW 5,3
kW 5,14
kW 4,55
kW 0,3
kW 0,6
V-ph-Hz
V-ph-Hz
A 12
A 16,5
A 1,37
A 2,72
mm 1522
mm 1625
mm 1280
mm 1590
mm 600
mm 600
1 ½"
Ø
(∆) With accessory SIL, the value decreases
by 2dB(A).
ESEER (European Sesonal EER) European
seasonal average efficiency.
ESEER+ with AdaptiveFunction Plus logic.
124 128
12/23,5/24,8 12,8/26,7/27,8
5,37 5,26
23,8 27,0
2,84 2,97
4,75 4,70
10,7/28,8/31
24,3 28,5
3,26 3,28
27,8 32,0
3,87 3,89
25,0 29,1
4,10 4,10
48 49
74 75
2x0,3 2x0,3
1,9 1,9
110 110
4000 4600
89/84 76/69
89/84 76/69
116/111 126/119
8,39 9,10
7,5 8,7
7,19 8,20
6,12 7,1
0,3 0,3
0,6 0,82
400-3+N-50
230-1-50
15 15
23,9 23,9
1,37 1,37
2,72 1,58
1522 1522
1625 1625
1280 1280
1590 1590
600 600
600 600
1 ½" 1 ½"