Sony SU-WL450 Informations D'installation page 8

Installing the Wall-Mount
Bracket to the Wall
1
Decide on the installation
location.
Make sure that the wall has enough space
for the TV and is capable of supporting a
weight of at least four times that of the TV.
Refer to your TV's Reference Guide for the
TV's weight.
Note
 When your TV is installed on the wall, the upper
side of the TV slightly leans forward.
 We recommend you to check the position of TV in
the viewing environment.
2
Select wall mounting style as
shown below.
2-a: Standard mounting
2-b: Slim mounting
• Refer "Measurement for Wall-Mount
Bracket installation on the wall" on page
15.
WARNING
 When 2-b is selected, rear terminal access is
limited.
2-a 2-b
− 8 (GB) −
3
If standard mounting (2-a) is
selected:
Fit Base Adaptor  by using
Screw (+PSW 4 × 10)  to Base
(20) .
• Refer "Base Adapter  fitting location" on
page 15.
Eg. Fitting Base Adaptor  at location "a"
If slim mounting (2-b) is
selected:
Skip this step.
4
Decide the positions of the
screws for installing the Base
(20) .
• Refer "Specifications" on page 14.
WARNING
 Determine the strength of the wall the TV will be
mounted on. Reinforce the wall sufficiently, if
necessary.
 The wall that the TV will be mounted on should be
able to support a weight of at least four times that
of the TV. (Refer to your TV's Reference Guide for
its weight.)
If standard mounting (2-a) is selected:
Use the hole positions of Base Adaptor .
Eg. Marking at location "a" to fit Base (20) 