Introduction; Items Supplied - Siemens SITRANS F FUT1010 Instructions De Service

Introduction

This Quick Start is for Siemens SITRANS FUT1010 IP65 (NEMA 4X) gas flowmeters. The
flowmeter includes the Transmitter and the Sensor Body with the TransLoc
System and is shipped with factory installed sensors and preset Site Setups.
NOTICE
The flowmeter menu parameters are pre-set at the factory.
It is not recommended to change the factory preset parameters. If changes are desired, use
care when changing Site Setup and Transducer Install menu cells.
Note
This Quick Start applies to the following FUT1010 IP65 NEMA 4X operating systems:
Version 3.03.00 and later / Version 5.03.00 and later.
1.1

Items supplied

● SITRANS F Flowmeter (Transmitter and Sensor Body)
● SITRANS F literature CD
● Quick Start
● For additional items refer to your packing slip.
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Gas Quick Start
Operating Instructions, 1/2013, A5E02639183-AC
1
Mounting
TM
5