Change Settings - HP scanjet 8200 Série Guide De L'utilisateur

change settings

You might want to change settings for the scanner to accommodate the type of
work that you do. The HP Scanjet 8200 series scanners enable you to change
button settings, scanning preferences, power usage, and whether the scanning
takes place immediately or waits for the warm-up cycle to complete.
change button settings
You can change settings for the scanner buttons by pressing the B
S
ETTINGS
1 Press the B
The Button Settings dialog box appears.
2 Click the appropriate tab, and change the settings.
3 When finished with the changes, click OK.
change settings from the hp director
The Settings menu in the HP Photo & Imaging software provides a means of
changing all scanning settings. It includes button settings, scanning preferences,
and other settings that you can change. To change settings start the HP Director,
and click Settings.
turn preview image on or off
You can change whether a preview image appears or does not appear. See the
HP Photo & Imaging software help for instructions and locations.
use the Power Save button
Use the P
scanner. When the P
small indicator lights, and the front panel display turn off.
To use the scanner again, press any button on the front panel or start a scan from
the HP Director. After a short warmup cycle, the scan begins.
enable instant scanning
Use the instant scanning feature to set the scanner to begin scanning
immediately, without waiting for the lamp to warm up.
1 Open the HP Director, click Settings, and click Scan Preferences.
2 Click the Quality vs. Speed tab.
–
–
user's manual
button ( ).
S
UTTON ETTINGS
S button (
OWER AVE
S
OWER AVE
To eliminate the lamp warm-up time and enable instant scanning, select
the Instant lamp warm-up check box.
To reduce power consumption, clear the Instant lamp warm-up check
box.
button ( ).
) to turn off the lamp when not using the
button ( ) is pressed, the scanner lamp, the
how to use the scanner
UTTON
9