Changing The Standard Plate - JVC KD-SC900R Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To select the scroll mode—SCROLL
You can select the scroll mode for the disc
information (when the entire text cannot be
shown all at once).
When shipped from the factory, scroll mode is
set to "ONCE."
• ONCE:
Scrolls only once.
• AUTO:
Repeats the scroll (5-second
intervals in between).
• OFF:
Cancels scroll mode.
Note:
Even if the scroll mode is set to "OFF," you can scroll
the display by pressing DISP (display) for more than
one second.
To turn the tag display on or off—TAG DISP
An MP3 file can contain file information called
"ID3 Tag" where its album name, performer, track
title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version
1) and ID3v2 (ID3 Tag version 2). This unit is
compatible only with ID3v1.
When shipped from the factory, "TAG ON" is
selected.
• TAG ON:
Turns on the ID3 tag display while
playing MP3 files.
• If an MP3 file does not have ID3
tags, folder name and file
name appear.
Note:
If you change the setting from "TAG
OFF" to "TAG ON" while playing an
MP3 file, the tag display will be
activated when the next file starts
playing.
• TAG OFF: Turns off the ID3 tag display while
playing MP3 files. (Only the folder
name and file name can be
shown.)

Changing the standard plate

You can change the standard plate with another
plate supplied with your unit.
You can also download them by visiting
<http://www.jvc.co.jp/jvccar>.
• When changing the plate, be careful not to
leave your fingerprints on the plate or cover.
1
Loosen the screws with the supplied
hex screwdriver.
2
Remove the plate cover and the
standard plate.
Standard plate
CONTINUED ON THE NEXT PAGE
Plate cover
33

Publicité

Table des Matières
loading

Table des Matières