Preparing For Use; Preparation; Application Tips; Using The Appliance - Philips VisaCare SC6240 Mode D'emploi

Masquer les pouces Voir aussi pour VisaCare SC6240:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

'Battery low' indication

Preparing for use

Using the appliance

4222_100_1877_3_DFU-Luxury_A5_v4.indd 11
When the battery is almost empty, the charging light flashes amber for
4 seconds during use and after you have switched off the appliance.
The battery still contains enough energy for a complete 5-minute session.
When the battery is completely empty, the device switches off automatically
and the charging light flashes amber very quickly.
Make sure you have charged the appliance for 8 hours before you use it for
the first time.

Preparation

Always clean your face and gently dry it before you use the appliance.
Note: The appliance is intended for dry use only. Do not use it on a wet face
or in the shower or bathtub.

Application tips

VisaCare comes with two different tips:
-
'Normal' tip for regular use.
-
'Sensitive' tip for mild use.
We advise you to use the 'Sensitive' tip during the first sessions to see how
your skin reacts. If the skin reacts well to the 'Sensitive' tip, you can try the
'Normal' tip. Normal and adverse skin reactions are described elsewhere in
this user manual (see 'Troubleshooting').
Note: Use the QR-code on the front cover or follow the link to watch the
online video for instructions on correct use of the appliance.
Note: Use the appliance twice a week. Do not use the appliance more often,
as this may cause skin irritation.
1 Press the on/off button to switch on the appliance.
English
11
22/01/18 08:28

Publicité

Table des Matières
loading

Table des Matières