JVC KV-ADV6270 Manuel D'instructions page 41

Symptom
• "CHECK" keeps flashing on the display.
• "NO FILE" flashes on the display.
• "NOT SUPP" appears on the display and track
skips.
• "READ" and "FAILED" appear alternately
on the display, then returns to the previous
source.
• Correct characters are not displayed (e.g.
album name).
• While playing a track, sound is sometimes
interrupted.
• "NO DISC" appears on the display.
• "NO MAG" appears on the display.
• "RESET 8" appears on the display.
• "RESET 1" – "RESET 7" appears on the display. Press the reset button of the CD changer.
• The CD changer does not work at all.
Remedy/Cause
• Readout time varies depending on the USB memory.
• Do not use too many hierarchy and folders.
• Turn off the power then on again.
Attach a USB memory that contains tracks encoded in an
appropriate format.
The track is unplayable.
• The attached USB memory may be malfunctioning, or
may not have been formatted correctly. The files included
in the USB memory are corrupted.
• Do not pull out or attach the USB memory while "CHECK"
is shown.
This unit can only display letters (upper case), numbers, and
a limited number of symbols.
MP3/WMA tracks have not been properly copied into the
USB memory. Copy MP3/WMA tracks again into the USB
memory, and try again.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
Reset the unit (see page 2).
41
Continued on the next page