Before Using Your Quest; Robot Vacuum - Hoover BH70600 Série Mode D'emploi

Before using your Quest

Robot Vaccum
TM
Attaching Side brush
Locate the side brush post on the bottom of the robot. Place
the side brush in the post and press firmly until it snaps into
position.
Microfiber Dust Pad (for BH70800 Series only)
Locate velcro tape underneath your Quest 800. Align the
™
Microfiber Dust Pad and press firmly.
NOTE:
Microfiber Dust Pad is machine washable. Do not use fabric softener.
10