Getting Started With Your Docking Station - Hoover BH70600 Série Mode D'emploi

Getting started with your docking station

Choose a hard level surface against a wall for your docking station.
There should be at least a 4 foot clear path in all directions.
Remove clear film from the rubber feet underneath the docking
station and place in location you've selected.
Always keep the docking station plugged in.
CAUTION
! !
Rubber may cause unwanted
stains or discoloration on certain
surfaces such as wood. Check
the manufacturer's recommenda-
tions to avoid damage.
NOTE:
Do not place invisible wall near the
docking station. Otherwise your robot may
be impeded from docking to the station.
8