AirApp RH60 Notice D'utilisation page 10

To reduce the risk of injury, the operating instructions and safety instructions must
Check the hydraulic jack for damage before using it. Its use is prohibited if any
Never lie under a vehicle that is supported by the hydraulic jack only.
After lifting the vehicle, secure the hydraulic jack immediately with the locking pin.
Never manoeuvre or move the hydraulic jack without locking pin.
Never exceed the maximum load-bearing capacity.
Never start or drive the vehicle while it is supported by a hydraulic jack.
Do not use the RH60 hydraulic jack for tyres wider than 310 mm.
© Copyright – AirApp Power Tools GmbH • Siemensstrasse 9 – 11 • 40885 Ratingen • Germany
WARNING
be read and understood.
Only use the jack on firm and level ground.
damage has not been repaired.
1
5
Figure 1
2
5
6
3
4
Never manoeuvre the vehicle
without locking pin.
1. Wheel holder
2. Foot pedal
3. Locking pin
4. Vent valve
5. Roller, wheel holder
6. Hook
8