Burner Cap Placement - Thermador PROFESSIONAL PRO GRAND PRG364JDG Mode D'emploi

Checking Burner Cap Placement
• Check each burner to make sure there is no gap
between the burner cap and burner base. See
Figure 13 and Figure 14 for examples of correct and
incorrect placements of the burner cap.
• You may gently try to move the burner caps from side
to side to check if the caps are properly placed on the
burner bases. When properly placed, each burner cap
will rest flat on top of its burner base, and completely
cover the star-shape of the burner base when viewed
from the top as shown in Figure 13.
Figure 13: Correct Burner Cap Placement
Figure 14: Incorrect Burner Cap Placement
WARNING:
To prevent flare-ups and avoid the creation of harmful
by-products, do not use the rangetop without all burner
caps and all burner grates properly positioned.
English 14

Burner Cap Placement

The burner caps must be properly placed on the STAR
burner bases for the rangetop to function properly. If the
burner cap is not properly placed, one or more of the
following problems may occur.
• Burner flames are too high.
• Flames shoot out of burners.
• Burners do not ignite.
• Burner flames light unevenly.
• Burner emits gas odor.
WARNING:
To prevent burns, do not touch burner caps or grates
while hot. Turn the rangetop off and allow the burners to
cool.
Electronic Single Point Ignition
Burner Base Burner Base Burner Base
Figure 16: STAR Burner Components
Igniter Igniter Igniter
Figure 15: Igniter
Burner Cap Burner Cap Burner Cap
Igniter Igniter Igniter