Velleman VM151 Mode D'emploi page 5

TRANSMITTER INSTRUCTIONS
The transmitter comes with a factory set default code.
Open the enclosure :
open
Changing the code :
1. Hold SW1 (left button).
2. Briefly press the 'program'-button (SW3) 3 times. The LED will flash 3 times.
3. Release SW1.
4. Your unique 32-bit code has been generated and stored.
Return to the default code :
1. Hold SW1 (left button).
2. Hold the 'program'-button (SW3). After +/- 10s the led will flash 5 times.
3. Release both buttons.
4. Your code has been erased.
SW1 LED
SW2
SW3
Transmitter instructions
5