SilverCrest SKD 2300 A1 Mode D'emploi page 59

Masquer les pouces Voir aussi pour SKD 2300 A1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

RP74308 Konvektor LB1 Seite 57 Dienstag, 26. Juni 2012 12:07 12
Warranty period and statutory claims
relating to defects
The warranty period is not extended when a
service is provided under warranty. This also
applies to replaced and repaired parts. Any
damage or defects present at purchase must
be reported immediately the product is unpa-
cked. Repairs incurred once the warranty
period has expired are chargeable.
Scope of warranty
The
product
has
manufactured in accordance with strict
quality guidelines and was thoroughly
checked before being delivered.
The warranty applies to defective materials
or workmanship. This warranty does not
extend to product parts exposed to normal
wear and tear (and which can therefore be
considered wear parts) or to damage to
fragile parts such as switches, batteries or
parts made of glass.
This warranty is void if the product is
damaged or if it is not used or maintained
properly.
All
the
operating instructions should be observed
precisely to ensure that the product is used
properly.
It is essential to avoid intended uses and
actions which are discouraged or warned
against in the operating instructions.
The product is intended for only private use
and not for commercial purposes.
The warranty is void in the event of misuse,
incorrect
treatment,
interference by anyone other than our
authorized service centre.
SKD 2300 A1
been
carefully
information
in
the
use
of
force
or
Warranty process
Please follow the instructions below to
ensure that your claim is processed quickly.
• In case of any enquiry, please keep the
article number (for this product: IAN
74308) and the till receipt as proof of
purchase.
• The article number can be found on the
rating plate, as an engraving, on the
cover sheet of your instructions (bottom
left) or as a label on the back or under-
side of your appliance.
• If malfunctions or any other defects
should occur, in the first instance contact
the Service Centre mentioned below by
telephone or e-mail.
• Once a product has been recorded as
defective, you can then send it Freepost
to the service address you are given,
enclosing the proof of purchase (till
receipt) and quoting what the defect is
and when it occurred.
You
can
instructions and many other
manuals, product videos and
software from
www.lidl-service.com.
download
these
57

Publicité

Table des Matières

Dépannage

loading

Table des Matières