Ceiling Fan Assembly - Emerson HF1160BQ02 Mode D'emploi

BP7272-4 HF1160.qxp_BP7272 9/10/15 9:44 PM Page 5
3.1
CAUTION: The blade assemblies must be mounted on
the motor assembly so that the "This Side Up" label is
visible at the top of the motor (Figure 1).
3.2
Install one non-reversible blade assembly on the top of the
motor assembly using two 1/4-20 x 1/2" Phillips hex head
screws, two split lockwashers and two flat washers
(supplied) (Figure 2).
Repeat this procedure for the remaining two blade
assemblies.
Tighten each blade screw to secure each blade assembly
to the motor housing.
To reduce the risk of personal injury, do not bend the
blade flanges when installing the blades, balancing the
blades, or cleaning the fan. Do not insert foreign objects
between rotating fan blades.
3.3
Using the setscrew wrench (supplied), remove the two
setscrews from the top of the motor yoke (Figure 3).
Retain the setscrews for future use. (Figure 3).

3. Ceiling Fan Assembly

WARNING
!
BLADE ASSEMBLY
LABEL
Figure 1
1/4-20 x 1/2" PHILLIPS
HEX HEAD SCREW
SPLIT LOCKWASHER
FLAT WASHER
BLADE
ASSEMBLY
LABEL
MOTOR ASSEMBLY
Figure 2
MOTOR YOKE
SETSCREW (2)
ALLEN WRENCH
Figure 3
Please contact 1-800-654-3545 for further assistance
5
emersonfans.com
U.L. Model No.: HF1160-2