How To Wire Your Ceiling Fan - Emerson HF1160BQ02 Mode D'emploi

BP7272-4 HF1160.qxp_BP7272 9/10/15 9:44 PM Page 10
If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
5.1
Connect the green grounding wire from the hanger ball,
the green grounding wire from the hanger bracket, and the
green grounding wire from the fan to the grounding
conductor of the supply (this may be a bare wire or wire
with green colored insulation).
Securely connect wires with a wire connector (supplied)
(Figure 15).
CAUTION: Use larger U.L. listed wire connectors if
supply source wires are larger than #12 AWG.
5.2
Securely connect the fan motor white wire to the supply
white (neutral) wire using wire connector (supplied)
(Figure 16).

5. How to Wire Your Ceiling Fan

WARNING
!
GROUND
CONDUCTOR SUPPLY
LISTED WIRE
CONNECTOR
GREEN WIRE
(GROUND) FROM
HANGER BALL
GREEN WIRE
(GROUND) FROM
HANGER BRACKET
Figure 15
WARNING
!
This product is designed to use only those parts supplied
with this product and/or any accessories designated
specifically for use with this product by Emerson Electric
Co. Substitution of parts or accessories not designated
for use with this product by Emerson Electric Co. could
result in personal injury or property damage.
Figure 16
10
SUPPLY WHITE
(NEUTRAL)
LISTED WIRE
CONNECTOR
FAN MOTOR
WHITE WIRE
U.L. Model No.: HF1160-2