Receiving A Call - Tait T2020II Guide De L'utilisateur

The Transmit
Timer
Responding
to calls
Monitor
CTCSS
DCS

Receiving a Call

The radio is fitted with a preprogrammed timer to limit
the maximum length of transmissions. When this time
limit is reached, a three tone warning is sounded and
transmission stops. You must release the PTT key
before proceeding.
To be able to receive calls on a single channel, simply
check that the radio has the appropriate channel
selected (see "Selecting a Channel").
To be able to receive calls on several channels, see
"Scanning".
When you receive a call, the radio will unmute and you
will hear the incoming transmission. Listen for your own
call sign and respond promptly. To respond, simply lift
the microphone off-hook, press the PTT key and identify
yourself.
II
The T2020 is fitted with mute functions which screen
out weak signals and calls intended for other people.
The table below describes these mutes and how to use
the Monitor (
Purpose:
To eliminate signals that
do not carry your fleet's
identifying tone or code.
) key to turn them on and off.
To turn on or off:
Press the Monitor (
key briefly.
(If hookswitch monitoring is
preprogrammed, lifting the
microphone off-hook will
have the same effect.)
Press briefly again to reac-
tivate.
)
13
English