Getting Started - Tait T2020II Guide De L'utilisateur

Variation in
radio setup
Switching the
radio on
Selecting a
channel

Getting Started

II
Your T2020 is microprocessor controlled so that it can
be configured to suit the needs of your fleet.
II
If your T2020
User's guide, check with the person who programs your
radio.
To switch the radio on, turn the On/Off-Volume control
to about one third of its maximum setting. You may
need to re-adjust the volume when you receive your first
call.
When you switch your T2020
channel that was active when it was last used.
To check the channel:
Select the channel mode. Select a new channel by:
does not operate as described in this
II
on, it will select the
To change to the channel:
• using the scroll keys
(
move through the list of
available channels, or
• using the keypad to enter
a new channel number,
or
• using the keypad to enter
an alphanumeric label
(
) and ( ) to
).
English
11