General Operation; Main Settings Menu - Mitsubishi Electric ecodan geodan EHGT17D-YM9ED Mode D'emploi

4
Customising Settings for Your Home

General Operation

In general operation the screen displayed on the main remote control-
ler will be shown as in the figure on the right.
This screen shows the target temperature, space heating mode, DHW
mode, any additional heat sources being used, holiday mode, and the
date and time.
You should use the function buttons to access more information. When
this screen is displayed pressing F1 will display the current status and
pressing F4 will take the user to the option menu screen.
<Option screen>
This screen shows the main operating modes of the system.
Use function buttons to switch between Operating (►), Prohibited ( )
and Timer ( ) for DHW and space heating, or detailed information on
energy or capacity.
The option screen allows quick setting of the following;
• Forced DHW — to turn ON/OFF press F1
• DHW operating mode — to change mode press F2
• Space heating operating mode — to change mode press F3
• Energy monitor
Following accumulated energy values are displayed.
: Consumed electrical energy in total (month-to-date)
: Delivered heat energy in total (month-to-date)
To monitor the energy values in each operation mode for [month-
to-date/ last month/ the month before last/ year-to-date/ last year],
press F4 to access to the Energy monitor menu.
Note:
If a certain accuracy is required for the monitoring, the method
to display captured data from external energy meter(s) should be
set up. Contact your installer for further details.

Main Settings Menu

To access the main settings menu press button B 'MENU'
The following menus will be displayed;
• [DHW]
• [Heating]
• [Schedule timer]
• [Holiday mode]
• [Initial settings]
• [Service] (Password protected)
[Initial Settings]
1. From the main settings menu use F2 and F3 buttons to highlight 'Ini-
tial settings' icon and select by pressing CONFIRM.
2. Use F1 and F2 buttons to scroll through the menu list. When the re-
quired title is highlighted then press CONFIRM to edit.
3. Use the relevant function buttons to edit each initial setting then
press CONFIRM to save the setting.
Initial settings that can be edited are
[Date/Time] *Be sure to set it to the local standard time.
●
[Language]
●
[Summer time]
●
[Temp. display]
●
[Contact number]
●
[Time display]
●
[°C/°F]
●
[Room sensor settings]
●
To return to the main settings menu press the BACK button.
Home screen
Option screen
Main settings menu screen
Icon Description
[Hot water (DHW)]
[Heating]
[Schedule timer]
[Holiday mode]
[Initial settings]
[Service]
en
6