Working Advice; Maintenance And Service; Maintenance And Cleaning - Bosch PTK 3,6 V Mode D'emploi

Masquer les pouces Voir aussi pour PTK 3,6 V:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
OBJ_BUCH-54-003.book Page 17 Monday, August 17, 2009 10:10 AM

Working Advice

This machine is not suitable for working
with 19 mm staples. Therefore, do not use
the machine to fasten ceiling panelling with
profiled wood or grooves.
Avoid blank shots in order to reduce the wear of
the impact striker. After finishing your work, set
the hammer force with the thumbwheel for ham-
mer-force preselection 1 to a low value, in order
to relieve the tension spring.
Removable Protective Cap for Tacker Head
(see figure C)
When working sensitive surfaces, e. g., foils, at-
tach the removable protective cap 12 onto the
tacker head 5.

Maintenance and Service

Maintenance and Cleaning

Before any work on the power tool, remove
the battery.
For safe and proper working, always keep
the machine and ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
Bosch Power Tools
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
1 609 929 S65 | (17.8.09)
English | 17

Publicité

Table des Matières
loading

Table des Matières