Commissioning And Operation - Klarstein METROBREEZE MIAMI Mode D'emploi

EN
30

COMMISSIONING AND OPERATION

Commissioning
1. Select a location where there is a power connection nearby.
2. Install the exhaust hose.
4. Plug the mains plug into the socket.
5. Press the ON/OFF button to turn on the unit.
Switching the unit on/off
Press the ON/OFF button to turn on the unit. Press the button again to turn off the unit.
SPEED button
Press this button several times to adjust the fan speed. You can choose between low,
medium and high fan speeds.
Note: The fan speed cannot be adjusted in dehumidification and snooze modes. The
fan speed is low in these two modes.
SLEEP button
• If you press the SLEEP button in cooling mode to enter sleep mode, the set
temperature is automatically increased by 1°C after one hour and automatically
increased by 2°C 2 hours later.
• If you press the SLEEP button in heating mode to enter sleep mode, the set
temperature is automatically lowered by 1°C after one hour and automatically
lowered by 2°C 2 hours later.
• When the SLEEP button is pressed again, the sleep mode is deactivated.
Note: In sleep mode, fan speed is at low speed and cannot be adjusted.