Shaving - SilverCrest SLS 3 A1 Mode D'emploi

Shaving

NOTE
► If your skin is sensitive or prone to allergic skin
reactions, try the shaver first on a small, unobtrusive
area .
1) Ensure the shaver unit 2 is attached and locked in
place .
2) Press the travel lock, which is located on the on/off
switch 5 and push the on/off switch 5 towards the
shaver unit 2 . The appliance starts .
The travel lock ensures that the appliance does not
start up accidentally, for example, when stowed away .
NOTE
► Before dry shaving, ensure that your skin is free of
cream or oil residue . Your skin should be clean and
dry .
3) Hold the shaver perpendicular to the skin and guide
the shaver unit 2 in straight movements against the
direction of hair growth . Apply repeatedly . The small
rubber lip in front of the shaving head 3 ensures that
the skin is pulled tight and also causes the hairs to
stand upright a little .
4) After you have covered all the areas you want to
shave, push the on/off switch 5 back into its initial
position . The appliance stops .
5) Clean the shaver after every use with the supplied
cleaning brush 9 . For a more thorough cleaning,
read the section "Cleaning, care and maintenance" .
SLS 3 A1
GB │ IE │ NI │ 7 ■