JVC KD-S88BT Manuel D'instructions page 28

Masquer les pouces Voir aussi pour KD-S88BT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Menu item
DIMMER SET
BRIGHTNESS
SCROLL *
TAG DISPLAY ON : Shows the Tag information while playing MP3/WMA/WAV tracks. / OFF : Cancels.
PRO EQ
FADER *
BALANCE *
LOUD
VOL ADJUST
L/O MODE
SUB.W LPF *
SUB.W LEVEL *
HPF
BEEP
*
3
The illumination control lead connection is required. (See "Installation/Connection Manual.") This setting
may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case,
change the setting to any other than <DIMMER AUTO>.
*
4
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
5
If you are using a two-speaker system, set the fader level to <00>.
*
6
This adjustment will not affect the subwoofer output.
*
7
Displayed only when <L/O MODE> is set to <SUB.W>.
28
ENGLISH
AUTO : Changes the display and button illumination between the Day/Night
adjustments in <BRIGHTNESS>/<COLOR SETUP> setting when you turn off/on the car
headlights *
3
. / ON : Selects the Night adjustments in <BRIGHTNESS>/<COLOR SETUP>
setting for the display and button illumination. / OFF : Selects the Day adjustments in
<BRIGHTNESS>/<COLOR SETUP> setting for the display and button illumination.
DAY [ 31 ] / NIGHT [ 15 ] : Customizes the display and button illumination brightness
level [ 00 — 31 ] for day and night.
4
ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at 5-second
intervals). / OFF : Cancels.
(Pressing DISP for more than one second can scroll the display regardless of the setting.)
For settings, see page 26.
5,
*
6
R06 — F06 [ 00 ] : Adjusts the front and rear speaker output balance.
6
L06 — R06 [ 00 ] : Adjusts the left and right speaker output balance.
ON : Boost low and high frequencies to produce a well-balanced sound at a low volume
level. / OFF : Cancels.
–05 — +05 [ 00 ] : Presets the volume adjustment level of each source (except
"FM"), compared to the FM volume level. The volume level will automatically increase or
decrease when you change the source. Before adjustment, select the source you want to
adjust. ("VOL ADJ FIX" appears on the display if "FM" is selected as the source.)
SUB.W : Selects if the REAR/SW terminals are used for connecting a subwoofer
(through an external amplifier). / REAR : Selects if the REAR/SW terminals are used for
connecting the speakers (through an external amplifier).
LOW 55Hz / MID 85Hz / HIGH 120Hz : Frequencies lower than 55 Hz/ 85 Hz/
7
120 Hz are sent to the subwoofer. / LPF OFF : Deactivates (all signals are sent to the
front/rear speakers).
7
00 — 08 [ 04 ] : Adjusts the subwoofer output level.
LOW 62Hz / MID 95Hz / HIGH 135Hz : Activates the High Pass Filter.
Frequencies lower than 62 Hz/ 95 Hz/ 135 Hz are cut off from the front/rear speakers. /
OFF : Deactivates (all signals are sent to the front/rear speakers).
ON / OFF : Activates or deactivates the keypress tone.
Selectable setting, [ Initial: Underlined ]

Publicité

Table des Matières
loading

Table des Matières