MSI MEG Z490 GODLIKE Mode D'emploi page 35

9. Insert the card into the PCI_E2 slot.
10. Use a screw to secure the card.
PCI_E2
11. Connect the PCIE_PWR1 to the power supply.
12. Connect the case's HDD LED cable to the JCASE connector.
13. Using the supplied HDD LED cable to connect the JMB connector and JFP1's HDD
pins (pin 1 & pin3).
14. Using the supplied JSMB cable to connect the JSMB connector on the card and
JSMB1 connector on the motherboard. And then you can set the fan duty cycle and
the LED color of the card in BIOS.
10
9
11
PCIE_PWR1
JCASE
+
JMB
+
JSMB
12
13
14
JSMB1
Overview of Components
JFP1
2
1
HDD LED
25