Pci_E1~4: Pcie Expansion Slots - MSI MEG Z490 GODLIKE Mode D'emploi

PCI_E1~4: PCIe Expansion Slots

⚠
Important
∙ If you install a large and heavy graphics card, you need to use a tool such as MSI
Gaming Series Graphics Card Bolster to support its weight to prevent deformation of
the slot.
∙ For a single PCIe x16 expansion card installation with optimum performance, using
the PCI_E1 slot is recommended.
When adding or removing expansion cards, always turn off the power supply and
∙
unplug the power supply power cable from the power outlet. Read the expansion
card's documentation to check for any necessary additional hardware or software
changes.
PCIe bandwidth configuration table for PCIe & M.2 slots
Slot
PCI_E1 (CPU)
PCI_E2 (CPU)
PCI_E3 (PCH)
PCI_E4 (PCH)
M2_1 (CPU)
M2_2 (PCH)
M2_3 (PCH)
(─: unavailable, @: graphics card,*: CrossFire only)
Note 1: You need to set the 3.0 x4 mode in BIOS for installed M.2 device to operate
PCIe 3.0 x4 speed.
Note 2: PCI_E4 will only operate at 3.0x1 speed and M2_3 will only operate at 3.0x2
speed when both PCI_E4 is occupied with PCIE x4 card and M2_3 in use.
20
Overview of Components
PCI_E1: PCIe 3.0 x16 (CPU)
PCI_E2: PCIe 3.0 x8 (CPU)
PCI_E3: PCIe 3.0 x1 (PCH)
PCI_E4: PCIe 3.0 x4 (PCH)
Single
@ 3.0 x16
—
3.0 x1
3.0 3.0
—
x4 x1
3.0 x4
3.0 x4
3.0
3.0
— x4
x2
(Note)
2-Way
@ 3.0 x8
@ 3.0 x8
3.0 x1
3.0 3.0
—
x4 x1
3.0 x4
3.0 x4
3.0
3.0
— x4
x2
(Note)
3-Way*
@ 3.0 x8
@3.0 x8
3.0 x1
@3.0 x4
3.0 x4
3.0 x4
—