Ecrou De Serrage Rapide - Bosch SDS-clic1 603 340 031 Mode D'emploi

OBJ_BUCH-1537-003.book Page 10 Friday, June 24, 2016 9:11 AM
10 | Français
When the quick-clamping nut 3 is tightened without the arrow 1 being
within the index mark 2, the quick-clamping nut 3 can no longer be
manually released. Use a two-pin spanner for releasing the quick-
clamping nut; do not use a pipe wrench or similar.
Press the spindle lock button 6 to lock the grinder spindle 5 (see
figure B) or hold the grinder spindle 5 in place using a suitable span-
ner (see figure C). To tighten the quick-clamping nut 3, turn the grind-
ing disc firmly in clockwise direction.
A properly fastened, undamaged quick-clamping nut can be manually
loosened by turning the knurled ring in anticlockwise direction.
Never loosen a tight quick-clamping nut using pliers; always use
the two-pin spanner. Apply the two-pin spanner as shown in the fig-
ure – see figure D.
Subject to change without notice.

Ecrou de serrage rapide

 Impérativement observer les consignes de sécurité relatives à
l'outil électroportatif utilisé.
1 609 92A 38B | (24.6.16) Bosch Power Tools