Bosch 1 687 016 141 Notice Originale page 7

10. Align high-pressure hose with connection piece.
11. Tighten the union nut (fig. 6, item 1). Tightening
torque 25 – 30 Nm.
1
Fig. 6: Tightening union nut
12. Close the unused high-pressure outlets with sealing
cone (fig.7, item 2) and union nuts (fig. 7, item 1).
Tightening torque: 25 – 30 Nm.
1
25 - 30 Nm
2
Fig. 7: Plug for high-pressure outlet
Spare and wearing parts
Designation
Inlet connector
<)
Union nut
Connector
for high-pressure hose line
O-Ring ⌀9.5x2 (12x)
<)
Wearing part
<)
Robert Bosch GmbH
Order number
1 683 386 188
1 683 345 079
1 681 032 116
1 680 210 143
| 1 687 016 141 | 7 en
|
1 689 989 243 2015-01-30