Olympus CAMEDIA C-2020ZOOM Mode D'emploi page 13

Close-up display mode (3X inspection)
With each press of the Zoom lever toward T, the picture is enlarged 1.5X, 2X,
2.5X, and 3X. Pressing the Zoom lever toward W returns to 1X. Use the Jog
dial to select the section of the picture to view. To select another picture,
select 1X and move the Jog dial.
Slide-show
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select and press the right arrow. Press the OK button to start the slide-
show.
Connecting to a television
Recorded images can be viewed on a
TV (PAL only). Make sure that the power
of the TV and the camera are off before
connecting.
Connect the cable by inserting it into the
video output connector of the camera
and the input connector of the TV. Turn
on the TV. Set the Mode dial to
Select a picture using the Jog dial.
Protection
Press the OK button to protect the currently displayed picture.
One-frame erase
Display the picture you want to erase and press the Erase button. Press the
OK button with YES selected to erase the picture.
All-frame erase
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select CARD SETUP. Press the right arrow to select
button to display
selected to ease all the pictures in the card.
.
YES NO . Press the OK button again with YES
Video cable
Video output
connector
, and press the OK
13