Cording Foot - Janome QS2250 Livret D'instructions

Janome 2250 Instruction Manual

Cording Foot (743-813-008)

Machine setting
Stitch:
Thread tension:
Stitch length:
Stitch width:
Machine setting
Stitch:
Thread tension:
Stitch length:
Stitch width:
www.toews.com
C
3 - 6
0.5 - 1.5
2
D
3 - 6
0.5 - 1.5
5
Slots on this foot will hold one to three lengths of
cord in place while stitches form over the cords.
(Single cording)
Mark the design on the right side of the fabric.
Insert cording in the left slot of the foot with
5 cm (2Ó) extending behind the foot.
Set thestitch width so stitches just cover the cord.
Stitch slowly and smoothly turning the fabric as you
sew while guiding the cording over the marked line.
(Triple cording)
Slide the sewing threads to the left and insert three
strands of cording into the slots of foot with 5 cm (2Ó)
extending behind the foot.
The slots on the foot will hold the lengths of cording
in place while stitches form over the cording.
7
QS2250 Owners Manual/ User Guide