Section Vi Care Of Your Machine; Sewing Light; Dismantling And Assembling Hook Race - Janome QS2250 Livret D'instructions

Janome 2250 Instruction Manual
u
www.toews.com
w
q
t
r
e
y

SECTION VI CARE OF YOUR MACHINE

Sewing Light

The sewing light is located behind the face plate.
To change the bulb, take the face plate off the sewing
machine by removing the set screw.
* Unplug the power supply before changing the bulb.
•
To remove ............. Turn to the left.
•
To replace ............. Turn to the right.

Dismantling and Assembling Hook Race

Note:
Turn off the power switch or unplug the machine.
To dismantle hook race:
Raise the needle to its highest position and open the
hook cover.
Open the hinged latch of bobbin case and take it out of
the machine.
Open the hook race ring holders and remove the hook
race ring.
Remove the hook.
* Clean the hook race with a brush and a soft dry
cloth.
q
Bobbin case
w
Hook race ring holder
e
Hook race ring
r
Hook
t
Hook race
To assemble hook race:
Hold the hook by the center pin and fit it carefully back
into the hook race, forming a perfect circle with the
shuttle driver.
Attach the hook race ring making sure the bottom pin
fits into the notch.
Lock the hook race ring by turning the holders back into
position. Insert the bobbin case.
y
Pin
u
Notch
64
QS2250 Owners Manual/ User Guide