Cleaning And Maintenance; Disposal Of Packaging Materials; Energy Saving Tips - Indesit Rg 2330 Mode D'emploi

WARNING: Do not locate multiple
portable socket-outlets or portable
power supplies at the rear of the
appliance.

CLEANING AND MAINTENANCE

WARNING: Ensure that the
appliance is switched off and
disconnected from the power supply
before performing any maintenance
operation; never use steam cleaning
equipment - risk of electric shock.
Do not use abrasive or harsh
cleaners such as window sprays,
scouring cleansers, flammable
fluids, cleaning waxes, concentrated
detergents, bleaches or cleansers
containing petroleum products on
plastic parts, interior and door liners
or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning
tools.

DISPOSAL OF PACKAGING MATERIALS

The packaging material is 100% recyclable
and is marked with the recycle symbol
various parts of the packaging must therefore be
disposed of responsibly and in full compliance
with local authority regulations governing waste
disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable
or reusable materials. Dispose of it in accordance
with local waste disposal regulations. For further
information on the treatment, recovery and
recycling of household electrical appliances,
contact your local authority, the collection
service for household waste or the store where
you purchased the appliance. This appliance is
marked in compliance with European Directive
2012/19/EU, Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product
is disposed of correctly, you will help prevent
negative consequences for the environment and
human health. The symbol
on the accompanying documentation indicates
that it should not be treated as domestic waste
but must be taken to an appropriate collection
centre for the recycling of electrical and
electronic equipment.
with the wiring rules and the appliance must
be earthed in conformity with national electrical
safety standards.
Do not use extension leads, multiple sockets
or adapters. The electrical components must not
be accessible to the user after installation. Do not
use the appliance when you are wet or barefoot.
Do not operate this appliance if it has a damaged
power cable or plug, if it is not working properly,
or if it has been damaged or dropped.
If the supply cord is damaged, it must
be replaced with an identical one by the
manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard -
risk of electric shock.
WARNING: Do not locate multiple portable
socket-outlets or portable power supplies at the
rear of the appliance.
CLEANING AND MAINTENANCE
WARNING: Ensure that the appliance is
switched off and disconnected from the power
supply before performing any maintenance
operation; never use steam cleaning equipment -
risk of electric shock.
Do not use abrasive or harsh cleaners such
as window sprays, scouring cleansers, flammable
fluids, cleaning waxes, concentrated detergents,
bleaches or cleansers containing petroleum
products on plastic parts, interior and door liners
or gaskets. Do not use paper towels, scouring
pads, or other harsh cleaning tools.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the
. The
recycle symbol . The various parts of the packaging must therefore
be disposed of responsibly and in full compliance with local authority
regulations governing waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable materials.
Dispose of it in accordance with local waste disposal regulations.
For further information on the treatment, recovery and recycling
of household electrical appliances, contact your local authority, the
collection service for household waste or the store where you purchased
the appliance. This appliance is marked in compliance with European
Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent
negative consequences for the environment and human health. The
symbol on the product or on the accompanying documentation
indicates that it should not be treated as domestic waste but must be
taken to an appropriate collection centre for the recycling of electrical
and electronic equipment.

ENERGY SAVING TIPS

To guarantee adequate ventilation follow installation instructions.
Insufficient ventilation at the back of the product increases energy
consumption and decreases cooling efficiency.
Frequent door opening might cause an increase in Energy consumption.
The internal temperature of the appliance and the Energy Consumption
may be affected also by the ambient temperature, as well as location of
the appliance. Temperature setting should take into consideration these
factors. Reduce door opening to minimum.
When thawing frozen food, place it in the refrigerator.
temperature of the frozen products cools the food in the refrigerator.
Allow warm food and drinks to cool down before placing in the
appliance.
on the product or
Positioning of the shelves in the refrigerator has no impact on the
efficient usage of energy. Food should be placed on the shelves in such
way to ensure proper air circulation (food should not touch each other
and distance between food and rear wall should be kept).
21
ENERGY SAVING TIPS
To guarantee adequate ventilation follow
installation instructions. Insufficient ventilation
at the back of the product increases energy
consumption and decreases cooling efficiency.
Frequent door opening might cause an
increase in Energy consumption. The internal
temperature of the appliance and the Energy
Consumption may be affected also by the
ambient temperature, as well as location of
the appliance. Temperature setting should
take into consideration these factors. Reduce
door opening to minimum. When thawing
frozen food, place it in the refrigerator. The
low temperature of the frozen products cools
the food in the refrigerator. Allow warm food
and drinks to cool down before placing in the
appliance.
Positioning of the shelves in the refrigerator has
no impact on the efficient usage of energy. Food
should be placed on the shelves in such way to
ensure proper air circulation (food should not
touch each other and distance between food and
rear wall should be kept).
You can increase storage capacity of frozen food
by removing baskets and, if present, Stop Frost
shelf. Do not worry about noises coming from
the compressor which are normal operation
noises.
The low
You can increase storage capacity of frozen
and, if present, Stop Frost shelf.
Do not worry about noises coming from
normal operation noises.