Belkin G Plus MIMO Manuel De L'utilisateur page 40

Alternate Setup Method
Setting your Connection Type if You Are a Telstra
Your user name and password are provided to you by Telstra BigPond.
Enter this information below. Choosing your state from the drop-down
(6)
menu will automatically fill in your login server IP address. If your
login server address is different than one provided here, you may
manually enter the login server IP address by placing a check in the
box next to "User Decide Login Server Manually"
address next to "Login Server"
information, click "Apply Changes"
the Internet Status indicator will read "Connection OK" if your Router
is set up properly.
(1)
(2)
(3)
(4)
(5)
1. Select your State
Select your state from the drop-down menu
Server" box will automatically be filled in with an IP address.
If for some reason this address does not match the address
that Telstra has given, you can manually enter the login server
address. See "User Decide Login Server Manually"
2. User Name
Provided by your ISP. Type in your user name here.
(5)
. When you have entered all of your
(7)
. After you apply the changes,
38 38
BigPond User
®
(4)
and type in the
(6)
(7)
(6)
. The "Login
(4)
.