Belkin G Plus MIMO Manuel De L'utilisateur page 38

Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to
Point-to-Point Tunneling Protocol (PPTP)
[European Countries Only]. Some ISPs require a connection using
PPTP protocol, a type of connection most common in European
countries. This sets up a direct connection to the ISP's system. Type
in the information provided by your ISP in the space provided. When
you have finished, click "Apply Changes"
changes, the Internet Status indicator will read "Connection OK" if
your Router is set up properly.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
1. PPTP Account
Provided by your ISP. Enter your PPTP account name here.
2. PPTP Password
Type in your password and retype it into the "Retype Password"
box to confirm it.
3. Host Name
Provided by your ISP. Enter your host name here.
4. Service IP Address
Provided by your ISP. Enter your service IP address here.
(9)
. After you apply the
36 36