Belkin G Plus MIMO Manuel De L'utilisateur page 100

Troubleshooting
3.
Under the "Wireless Network Properties" tab, select a
network name from the "Available Networks" list and click the
"Properties" button.
4.
Under "Network Authentication", select "WPA-PSK (no server).
5.
Type your WPA key in the "Network key" box.
Important
: WPA-PSK is a mixture of numbers and letters from A-Z
and 0-9. For WPA-PSK you can enter eight to 63 characters. This
network key needs to match the key you assign to your Wireless
Router (or access point).
6.
Click "OK, then "Apply" to save the settings.
Problem:
I am NOT using a Belkin client card for a home network and I am having
difficulty setting up Wireless Protected Access (WPA) security.
Solution:
If you are not using a Belkin Wireless Desktop or Wireless Notebook
Network Card that is not equipped with WPA-enabled software, a
file from Microsoft called "Windows XP Support Patch for Wireless
Protected Access" is available for free download. Download the
patch from Microsoft by searching the knowledge base for Windows
XP WPA.
Note
: The file that Microsoft has made available works only with
Windows XP. Other operating systems are not supported at this
time. You also need to ensure that the wireless card's manufacturer
supports WPA and that you have downloaded and installed the
latest driver from their support site.
Supported Operating Systems:
• Windows XP Professional
• Windows XP Home Edition
98 98