Belkin G Plus MIMO Manuel De L'utilisateur page 19

Connecting and Configuring your Router
Step 1 Run the Easy Install Wizard Software
1
Shut down any programs that are running on your computer at this
time.
2 Make sure you have the following items at the computer that is now
directly connected to the cable or DSL modem. DO NOT CONNECT
THE ROUTER AT THIS TIME.
• The Easy Install Wizard CD-ROM
• The Router
• The Router Power Supply
• Category 5 Networking Cable
• This User Manual
3
Turn off any firewall or Internet-connection-sharing software on your
computer.
Select your region from the drop-down box shown on the screen.
Windows User: Insert the Easy Install
Wizard software CD into your CD-ROM
drive. The Network Setup Utility screen
will automatically appear on your screen
within 15 seconds. Click on "Run the
Easy Install Wizard" to begin.
Note for Windows Users:
Wizard does not start up automatically, select
your CD-ROM drive from "My Computer" and
double-click on the file named "Start" to start
the Network Setup Utility.
17 17
If the Easy Install
1
2
3
4
5
6
7
8
9
10