Belkin G Plus MIMO Manuel De L'utilisateur page 17

Knowing your Router
I. Reset Button
The "Reset" button is used in rare cases when the Router may
function improperly. Resetting the Router will restore the Router's
normal operation while maintaining the programmed settings. You
can also restore the factory default settings by using the "Reset"
button. Use the restore option in instances where you may have
forgotten your custom password.
(a) Resetting the Router
Push and release the "Reset" button. The lights on the Router
will momentarily flash. The "Power/Ready" light will begin to
blink. When the "Power/Ready" light becomes solid again, the
reset is complete.
(b) Restoring the Factory Defaults
Press and hold the "Reset" button for at least 10 seconds,
then release it. The lights on the Router will momentarily flash.
The "Power/Ready" light will begin to blink. When the "Power/
Ready" light becomes solid again, the restore is complete.
15 15
1
2
3
4
5
6
7
8
9
10