Dornbracht 12 330 970 90 Instructions De Montage page 5

Please read this manual and follow the instructions. All
GB
manuals and documents belonging to the product have to be
passed on to the end user. Otherwise the producer liability may
be limited in case of damage.
For questions or uncertainties regarding installation or
operation, please contact the Technical Service of Dornbracht.
You can find relevant contact details on the back of this manual
and on the we bsite of Dornbracht: www.dornbracht.com
Damages caused by non-observance of the instructions or use
not as intended are excluded from warrenty by Dornbracht.
All work has to be carried out by a competent and qualified
plumber according to appropriate DIN / EN directives
(DIN 1988, EN 1717, EN 806, TVO etc.), national regulations
and regulations of the local water supply companies.
All electrical work has to be carried out by a competent and
qualified electrician installer according to appropriate DIN / EN
directives (VDE 0100 etc.), national regulations and regulations
of the local power supply companies.
Local accident prevention regulations are to be followed
with priority.
Only use suitable ladders / climbing aids.
CAUTION!
Risk of crush injury
(by unintentionally closing the flap mechanism)
Two people are required to ensure safe assembly.
Work carefully.
During assembly, avoid putting your hand or fingers between
the moving parts of the flap mechanism.
– Cool any bruising immediately.
– All contusions must be examined by a doctor and treated if
necessary.
CAUTION!
Risk of cuts caused by sharp edges
Always wear safety gloves when carrying out the necessary work.
Do not allow other parts of your body (such as your head) to
come into contact with sharp edges.
– Elevate the injured part of the body.
– If necessary, clean and disinfect the cut and cover it with a
sterile dressing.
– Any deep cut must be examined and treated promptly by a
doctor.
– All more minor cuts should be examined by a doctor and
treated if necessary.
Technical data
General
Weight
Total (with optional accessory)
Optional accessory
Sanitary specifications
The product is intrinsically safe according to EN 1717.
The thermostat meets the requirements according to EN 1111.
Scalding protection (factory-adjusted)
Maximum flow at a flow pressure of 300 kPa / 44 psi / 3 bar
Total (with optional accessory)
TEMPEST
AQUA CIRCLE
QUEEN'S COLLAR
EMBRACE (optional accessory)
Hand shower set
SOOTHE (3:12 mins.)
NURTURE (3:45 mins.)
EMPOWER with optional
accessory EMBRACE (4:20 mins.)
Electrotechnical data
Ceiling module AQUAMOON
Supply voltage
Degree of protection
Equipotential bonding
78.5 kg / 173 lbs. (US)
9 kg / 19.8 lbs. (US)
43 °C / 109 °F
72.6 l/min / 19.2 gpm
10 l/min / 2.6 gpm
12 l/min / 3.2 gpm
24 l/min / 6.3 gpm
65 l/min / 17.2 gpm
7.6 l/min / 2.0 gpm
21.2 l / 5.6 gal
54.2 l / 14.3 gal
125 l / 33 gal
ATT
12 V DC
4 mm² / AWG 11
IP 55
5