Application - Siemens Milltronics easy aimer 2 Instructions D'utilisation

Coupling Options
Several coupling options are available for the Easy Aimer. Refer to the configuration sheet
for more information.
Coupling Size
- 1" NPT
- 1½" NPT
- 1" NPT
- 1" BSP
- 1½" BSP
Cable Gland and Coupling Option
Cable gland
Size
and coupling
- M20

Application

In solids applications, mount the transducer so it is aimed at the low level draw point. The
sighting block can be rotated through 360° with the transducer angled at 0 to 20° off
vertical.
Position the Easy Aimer so the transducer's sound path is unobstructed and away from fill
points.
The Easy Aimer is capable of withstanding 15 psi (North America) or 0.5 bar (Europe)
gauge pressure with proper installation and has a temperature rating from -40°C to 105°C
(-40°F to 220°F).
Mount the Easy Aimer to an access plate with welded studs or to a flange in order to
isolate the mounting holes from the pressurized environment.
Page 2
Material
- galvanized
- PVC
- aluminum
Material
- aluminum
Easy Aimer 2 – INSTRUCTION MANUAL
Where used
XPS-10, XPS-15, XCT 8, XCT-12,
XLS-60, XLT-30, XLT-60, XRS-5
XPS-30, XPS-40
XPS-10, XPS-15, XRS-5
XPS-10, XPS-15, XCT-8, XCT-12
XPS-30, XPS-40
Where used
cable gland and coupling connecting to
BSP conduit.
7ML19985HG62