Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Specifications
Accuracy
• ± 0.5 to 1% of totalization over 4 to 1 operating range, application dependent
Load Cell
• construction
• excitation
• output
• non-linearity
• hysteresis
• non-repeatability
• capacity
• overload
• temperature:
Belt Width
• up to 1200 mm (48" CEMA) width (See
Belt Speed
• up to 3m/s (600 fpm)
Capacity
• up to 1200 t/h (1320 STPH) at maximum belt speed
Conveyor Incline
• ± 20° from horizontal, fixed incline
• up to ± 30° with reduced accuracy
Idler Profile
• flat to 35°
• up to 45° with reduced accuracy
Idler Diameter
• 100 to 150 mm (4 to 6")
Idler Spacing
• 0.6 to 1.2 m (2.0 to 4.0 ft )
1.
Size normally used for mobile crusher applications.
Page 2
stainless steel
10 Vdc nominal, 15 Vdc maximum
2 mV/V excitation at rated load cell capacity
0.02% of rated output
0.02% of rated output
0.01% of rated output
50, 100, 250
safe 150% of rated capacity, ultimate 300% of rated
capacity
-40 to 65 °C (-40 to 150 °F) operating range
-10 to 40 °C (15 to 105 °F) compensated
MCS Belt Scale – INSTRUCTION MANUAL
1
lb stainless steel
Outline Dimensions
on page 5 )
7ML19985HN61
Publicité
Table des Matières
