Whirlpool WTW7990XG0 Guide D'utilisation page 21

First try the solutions suggested here or visit our website at www.whirlpool.com/help
If you experience
Washer not performing as expected (cont.)
Monthly maintenance not done as
Odors
recommended.
Not using HE detergent or using too
much HE detergent.
Sharp items were in pockets during
Fabric Damage
wash cycle.
Strings and straps could have tangled.
Items may have been damaged before
washing.
Fabric damage can occur if the load is
tightly packed.
Liquid chlorine bleach may have been
added incorrectly.
Garment care instructions may not
have been followed.
Clogged dispensers or laundry
Incorrect dispenser
products dispensing too soon.
operation
Liquid chlorine bleach not
used in dispenser or Oxi option
not selected.
for assistance and to possibly avoid a service call.
Possible Causes Solution
Run the Clean Washer cycle with AFFRESH
See "Cleaning Your Washer" in Washer Maintenance .
Unload washer as soon as cycle is complete.
Use only HE detergent. Be sure to measure correctly.
Always follow the manufacturer's directions.
See "Cleaning your Washer" section.
Empty pockets, zip zippers, and snap or hook fasteners before
washing to avoid snags and tears.
Tie all strings and straps before starting wash load.
Mend rips and broken threads in seams before washing.
Load garments in loose heaps evenly around the basket wall.
Loaded items should move freely during wash to
avoid damage.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer is started.
Do not pour liquid chlorine bleach directly onto load. Wipe up
bleach spills.
Undiluted bleach will damage fabrics. Do not use more than
recommended by manufacturer.
Do not place load items on top of bleach dispenser when
loading and unloading washer.
Always read and follow garment manufacturer's care
label instructions.
Do not overfill dispenser. Overfilling causes immediate dispensing.
Always select Fabric Softener and/or Oxi options to assure proper
dispensing.
Load dispensers before starting a cycle.
It is normal for small amounts of water to be remain in dispenser at
the end of the cycle.
Homes with low water pressure may result in residual powder in the
dispenser. To avoid, select a warmer wash temperature if possible,
depending on your load.
Use only liquid chlorine bleach in the Bleach/Oxi dispenser.
You may use powdered or liquid laundry boosters in the Bleach/
Oxi dispenser. Always select the Oxi option for proper flushing of
Oxi products from dispenser. Leftover powder may be wiped out by
hand, if needed. Otherwise, select Oxi option with the next cycle to
rinse out dispenser.
monthly.
®
21