Whirlpool WTW7990XG0 Guide D'utilisation page 20

TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.whirlpool.com/help
If you experience
Washer not performing as expected (cont.)
Sand, pet hair, lint, etc.
Heavy sand, pet hair, lint, and
on load after washing
detergent or bleach residues
may require additional rinsing.
Washer not loaded as recommended.
Load is tangling
Wash action and/or spin speed too
fast for load.
Wash load not completely
Not cleaning or
covered in water.
removing stains
Added more water to washer.
Washer not loaded as recommended.
Not using HE detergent or using too
much HE detergent.
Not using correct cycle for fabric type.
Not using dispensers.
Not washing like colors together.
20
for assistance and to possibly avoid a service call.
Possible Causes
Solution
Add an Extra Rinse to the selected cycle.
Load garments in loose heaps evenly around the basket wall.
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Select a cycle with a slower wash action and slower spin
speed. Note that items will be wetter than when using a
higher speed spin.
Washer senses load size and adds correct amount of water.
This is normal and necessary for clothes to move.
Do not add additional water to washer. Additional water lifts the
laundry off the impeller, resulting in less cleaning.
Load garments in loose heaps evenly around the basket wall.
For best cleaning, avoid tightly packing the load.
Load with dry items only.
Add only 1 or 2 garments after washer has started.
The suds from regular detergent can prevent washer from
operating correctly.
Use only HE detergent. Be sure to measure correctly.
Always measure detergent and follow detergent directions
based on load size and soil level.
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
If using Quick Wash cycle, wash only a few items.
Use Whites Load and Heavy Duty Clothes cycle for tough
cleaning.
Use dispensers to avoid chlorine bleach and fabric softener
staining.
Load dispensers before starting a cycle.
Avoid overfilling.
Do not add products directly to load.
Wash like colors together and remove promptly after the cycle is
complete to avoid dye transfer.