Dell OptiPlex 330 Guide De Référence Rapide page 61

5 Replace the computer cover (see "Replacing the Computer Cover" on
page 37).
NOTICE:
To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
6 Connect your computer and devices to electrical outlets, and turn
them on.
7 After the Microsoft
down your computer (see "Turning Off Your Computer" on page 12).
8 Turn off the monitor and disconnect it from the electrical outlet.
9 Disconnect the computer power cable from the electrical outlet, and press
the power button to ground the system board.
10 Open the computer cover.
11 Locate the 2-pin password jumper (PSWD) on the system board and
attach the jumper to reenable the password feature.
12 Replace the computer cover (see "Replacing the Computer Cover" on
page 37).
® ®
Windows desktop appears on your computer, shut
Quick Reference Guide
61