Operation; Connecting The Cables To The Stimulator; Preliminary Settings - Compex Edge Mode D'emploi

OPERATION

CONNECTING THE CABLES TO THE STIMULATOR

The stimulator cables plug into the 4 sockets on the front of the device.
Four cables can be connected simultaneously to the 4 channels of the device. Both
the sockets and the cables are color-coded to simplify use and facilitate identification
of the different channels.

PRELIMINARY SETTINGS

Before using the unit for the first time, you should select the working language of
the device which is displayed on the options screen. Follow the instructions below.
Afterwards, for the greatest comfort, the Compex Edge offers you a number of
setting options (operating language selection, display contrast setting, adjusting
backlighting and volume setting). To change any of these settings, bring up the
options screen by holding the On/Off button on the left of the stimulator for a few
seconds when the device is Off.
B
A C D E
18