Specifications; Cleaning The Unit; Maintenance; Storage And Transportation Conditions - Compex Edge Mode D'emploi

CLEANING THE UNIT

Do not sterilize the stimulator. To clean your unit, use a soft cloth and an alcohol-
based cleaning product, which does not contain solvents. Solvents could damage the
plastic parts, especially the panel covering the screen of your Compex Edge. Use only
a minimum amount of liquid when cleaning the unit.

MAINTENANCE

Do not attempt to repair the stimulator or any of its accessories. Never dismantle
the Compex Edge or the charger containing high-voltage parts because of risk of
electric shock. DJO, LLC declines all responsibilities for any damages or consequences
resulting from unauthorized attempts to open, modify, or repair the stimulator. This
may only be done by persons or repair services authorized by DJO, LLC.
Your stimulator does not require calibration. Each Compex Edge stimulator is always
tested and validated prior to distribution. Its characteristics do not vary under normal
conditions. Nonetheless, as the Compex Edge is a high quality electrical instrument,
its lifespan depends on the use that is made of it and the care and maintenance
it receives during its lifetime. If your stimulator contains parts that seem worn or
defective, please contact DJO, LLC regarding an upgrade.

STORAGE AND TRANSPORTATION CONDITIONS

The Compex Edge contains rechargeable batteries and so the storage conditions
must not exceed the following figures:
Storage temperature:
Max. relative humidity:
Atmospheric pressure:

PATENTS

The Compex Edge incorporates several innovations with patents pending.
from -20°C to 45°C, -4°F to 113°F
75%
from 700 hPa to 1060 hPa
30

SPECIFICATIONS