Belkin F5D7230-4 Manuel De L'utilisateur page 56

Using the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface
128-Bit WEP Encryption
Note to Mac users:
AirPort. To configure encryption for your Mac computer, set the
encryption using the manual method described in the next section.
1.
Select "128-bit WEP" from the "Security" menu's "Security Mode".
2.
After selecting your WEP encryption mode, you can enter your
key by typing in the hex key manually, or you can put a check
mark in "Passphrase", then type in your passphrase. Click
"Generate" to generate the hex keys.
A hex (hexadecimal) key is a combination of numbers and
letters from A–F and 0–9. For 128-bit WEP, you need to enter
26 hex keys.
For instance: C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
3.
Click "Apply Changes" to save the setting.
WARNING:
If you are configuring the Wireless G Router or access
point from a computer with a wireless client, you will need to ensure
that security is turned on for this wireless client. If this is not done,
your client will lose its wireless connection.
The passphrase option will not operate with Apple
54 54